
To make your own copies of this board that are identical to mine,
you could use any PC Board fabrication house, but I recomment AP Circuits.

Go to http://www.apcircuits.com

Download their current order form text file, and fill it the top part
of the form.  Fill in the bottom part of the form using this information:

SERVICE TYPE                          ;P1
Laminate Type                         ;FR4
Laminate Thickness                    ;.062
Circuit Board Size (in DECIMAL INCHES);2.000 X 2.000
GERBER TOP LAYER FILE NAME            ;sgt-04011-side2.grb
GERBER BOTTOM LAYER FILE NAME         ;sgt-04011-side1.grb
ASCII NC DRILL FILE NAME              ;sgt-04011-plated.drill sgt-04011-unplated.drill
NC DRILL TOOL SIZE FILE NAME          ;drill-list.txt
SPECIAL INSTRUCTIONS FILE NAME        ;Readme


Then Zip up this whole directory, and ftp or email it to apcircuits.
You'll get your boards from fedex in about 48 hours.


Include this in the Readme to AP Circuits:
---

Note: the CAD system is unable to generate a combined drill file with
both plated and unplated holes.

sgt-04011-plated.drill 		contains plated holes only
sgt-04011-unplated.drill 	contains unplated holes only

Both drill files are required to process the board.

Both drill files use a the same common drill tool list and contain 
the entire embedded tool list.


